4UTQ
A structural model of the active ribosome-bound membrane protein insertase YidC
ELECTRON MICROSCOPY
| Sample |
|---|
| MONOMERIC YIDC BOUND TO RIBOSOME NASCENT CHAIN COMPLEX(F0C) |
| Specimen Preparation | |
|---|---|
| Sample Aggregation State | PARTICLE |
| Vitrification Instrument | FEI VITROBOT MARK IV |
| Cryogen Name | ETHANE |
| Sample Vitrification Details | VITRIFICATION 1 -- CRYOGEN- ETHANE, INSTRUMENT- FEI VITROBOT MARK IV, |
| 3D Reconstruction | |
|---|---|
| Reconstruction Method | SINGLE PARTICLE |
| Number of Particles | 58960 |
| Reported Resolution (?) | 8 |
| Resolution Method | |
| Other Details | ONLY THE MEMBRANE PART WAS MODELED SUBMISSION BASED ON EXPERIMENTAL DATA FROM EMDB EMD-2705. (DEPOSITION ID: 12685). |
| Refinement Type | |
| Symmetry Type | POINT |
| Point Symmetry | C1 |
| Data Acquisition | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Detector Type | TVIPS TEMCAM-F416 (4k x 4k) | ||||||||
| Electron Dose (electrons/?**2) | 20 | ||||||||
| Imaging Experiment | 1 |
|---|---|
| Date of Experiment | 2013-06-01 |
| Temperature (Kelvin) | |
| Microscope Model | FEI TITAN KRIOS |
| Minimum Defocus (nm) | 1300 |
| Maximum Defocus (nm) | 3500 |
| Minimum Tilt Angle (degrees) | |
| Maximum Tilt Angle (degrees) | |
| Nominal CS | |
| Imaging Mode | BRIGHT FIELD |
| Specimen Holder Model | |
| Nominal Magnification | |
| Calibrated Magnification | |
| Source | FIELD EMISSION GUN |
| Acceleration Voltage (kV) | 200 |
| Imaging Details |
| EM Software | ||
|---|---|---|
| Task | Software Package | Version |
| RECONSTRUCTION | SPIDER | |
| Image Processing | ||||
|---|---|---|---|---|
| CTF Correction Type | CTF Correction Details | Number of Particles Selected | Particle Selection Details | |
| DEFOCUS GROUP | ||||
